Filter
Top Products
Chapter 16-RMX Administration and Utilities
16-16
Currently no flags are defined in the CS_MODULE_PARAMETERS
section.
3 To modify a flag value, double-click or select the flag and click the
Edit Flag button.
4 In the New Value field, enter the flag’s new value.
5 Click OK to close the Update Flag dialog box.
6 Repeat steps 2–4 to modify additional flags.
7 Click OK to close the System Flags dialog box
PAL_NTSC_VIDEO_
OUTPUT
When set to AUTO (default), the video output
sent by the RMX is either in PAL or NTSC
format.
To force the RMX to send the video in either
NTSC or PAL, change the flag value
accordingly.
Default: AUTO.
Table 16-2 System Flags – MCMS_PARAMETERS (Continued)
Flag Description
For flag changes to take effect, reset the MCU. For more information, see the
RMX Administrator’s Guide, "Resetting the RMX” on page 16-90.