Filter
Top Products
Appendix E-Participant Properties Advanced Channel Information
E-2
Frame Rate
(video only)
The number of video frames per second that are
transferred between the MCU and the endpoint.
Annexes (video
only)
Indicates the H.263 annexes in use at the time of the
last RTCP report. If the actual annexes used are
other than the declared annexes in the capabilities
exchange, the Faulty flag is displayed.
Channel Index For Polycom Internal use only.
RTP Statistics
Actual loss
The number of missing packets counted by the IP
card as reported in the last RTP Statistics report. If a
packet that was considered lost arrives later, it is
deducted from the packet loss count. Packet loss is
displayed with the following details:
• Accumulated N - number of lost packets
accumulated since the channel opened.
• Accumulated % - percentage of lost packets out
of the total number of packets transmitted since
the channel opened.
• Interval N - number of packets lost in the last
RTP report interval (default interval is 5 minutes).
• Interval % - percentage of lost packets out of the
total number of packets transmitted in the last
RTP report interval (default interval is 5 minutes).
• Peak - the highest number of lost packets in a
report interval from the beginning of the
channel's life span.
Table E-1 Participant Properties - Channel Status Advanced Parameters
Field Description