Filter
Top Products
Polycom RMX 2000 Administrator’s Guide
16-41
Configuring the Video/Voice Resources in MPM Mode
To allocate Audio Only resources:
1 In the RMX menu, click Setup > Video/Voice Port Configuration.
The Video/Voice Port Configuration dialog box opens.
A single slider is displayed, calibrated according to licensed video
resources indicated in CIF ports in the RMX.
2 Move the slider to the number of Audio Only ports to be allocated.
The slider moves in multiples of two, converting CIF video ports to
voice ports in groups of two, with each CIF video port converting to
five voice ports. The minimum number of voice ports that can be
allocated is 10 (2 video ports x 5 voice ports per video port).
3 Click OK.
4 Reset the MCU.
Resource Maximum from License
In Flexible Resource Capacity, any change in resource allocation requires a
reset of the RMX for changes to take effect.