Filter
Top Products
Polycom RMX 2000 Administrator’s Guide
15-19
Routing Name The Routing Name is defined by the user, however if
no Routing Name is entered, the system will
automatically assign a new name when the Profile is
saved as follows:
• If an all ASCII text is entered in Display Name, it is
used also as the Routing Name.
• If any combination of Unicode and ASCII text (or
full Unicode text) is entered in Display Name, the
ID (such as Conference ID) is used as the Routing
Name.
Conference
Profile
The default Conference Profile is selected by default.
If required, select the appropriate Profile from the list
of Profiles defined in the MCU.
Note: In the Conference Profile - Advance dialog box,
the Auto Terminate option enables you to
automatically terminate the Gateway Session when
one participant remains connected (excluding the
Recording Link).
A new Gateway Session is created using the
parameters defined in the Profile.
ID Enter a unique number identifying this conferencing
entity for dial in. Default string length is 4 digits.
If you do not manually assign the ID, the MCU assigns
one after the completion of the definition. The ID
String Length is defined by the flag
NUMERIC_CONF_ID_LEN in the System
Configuration.
Table 15-3 New Gateway Profile Properties (Continued)
Option Description