Filter
Top Products
Polycom RMX 2000 Administrator’s Guide
12-17
TCP Port from - to Displays the default settings for port numbers used
for signaling and control.
To modify the number of TCP ports, enter the first
and last port numbers in the range.
The number of ports is calculated as follows:
Number of simultaneous calls x 2 ports (1 signaling
+ 1 control).
UDP Port from - to Displays the default settings for port numbers used
for audio and video.
To modify the number of UDP ports, enter the first
and last port numbers in the range.
The number of ports is calculated as follows:
Number of simultaneous calls x 6 ports (2 audio + 4
video).
If the network administrator does not specify an adequate port range, the
system will accept the settings and issue a warning. Calls will be rejected
when the MCU’s ports are exceeded.
Table 12-7 Default IP Service – Conferencing – Ports Parameters
Field Description