Filter
Top Products
Chapter 12-Network Services
12-36
11 Define the following parameters:
12 Click OK.
The new range is added to the Dial-in Phone Numbers table.
13 Optional. Repeat steps 9 to 10 to define additional dial-in ranges.
14 Enter the MCU CLI (Calling Line Identification).
In a dial-in connections, the MCU CLI indicates the MCU’s number
dialed by the participant. In a dial-out connection, indicates the MCU
(CLI) number as seen by the participant
15 Click Next.
The Spans dialog box opens.
Table 12-16 Phones Settings
Field Description
First Number The first number in the phone number range.
Last Number The last number in the phone number range.
• A range must include at least two dial-in numbers.
• A range cannot exceed 1000 numbers.