Filter
Top Products
Chapter 2-Additional Conferencing Information
2-20
Changing the Default Layout for Displaying Content
on Legacy Endpoints
The default layout that will be used to display Content on the screens of
legacy endpoints is defined by the system flag
LEGACY_EP_CONTENT_DEFAULT_LAYOUT.
The configured default layout is 1+4 (
CP_LAYOUT_1P4VER). You can
change the default layout configuration by entering a new value for the
flag in the system configuration.
To modify system flags:
1 On the RMX 2000 menu, click Setup > System Configuration.
The System Flags dialog box opens.
2 In the MCMS_PARAMETERS
tab, click the
LEGACY_EP_CONTENT_DEFAULT_LAYOUT entry.
The Update Flag dialog box is displayed.
3 In the Value field, enter the flag value for the required layout as
follows:
Table 2-6 LEGACY_EP_CONTENT_DEFAULT_LAYOUT Flag Values
Layout Flag Value
CP_LAYOUT_1X1
CP_LAYOUT_1X2
CP_LAYOUT_1X2HOR
CP_LAYOUT_1X2VER
CP_LAYOUT_2X1
CP_LAYOUT_1P2HOR