Filter
Top Products
Chapter 16-RMX Administration and Utilities
16-42
Configuring the Video/Voice Resources in MPM+
Mode
There are two Resource Capacity modes in MPM+ Mode:
• Flexible Resource Capacity
• Fixed Resource Capacity
The resource allocation mode is saved by the RMX and is activated when
the RMX is restarted.
Flexible Resource Capacity
Flexible Resource Capacity is the default resource allocation mode in MPM+
Mode and is functionally identical to the MPM Flexible Resource Capacity
described above.
To allocate Audio Only ports in MPM+ mode:
1 Optional (otherwise skip to step 2): If the RMX is in Fixed Resource
Capacity mode:
a In the RMX menu, click Setup > Video/Voice Port
Configuration.
The Video/Voice Port Configuration dialog box opens.
b In the Resource Capacity Mode box, select Flexible Resource
Capacity.
c Click OK.
d Restart the RMX from the Hardware Monitor pane.
2 In the RMX menu, click Setup > Video/Voice Port Configuration.
The Video/Voice Port Configuration dialog box opens.
If switching from Fixed mode, all video resources are allocated as CIF
video ports.
3 Continue with Step 2 of the MPM Mode Flexible Resource Capacity
procedure described above.
To allocate resources in Fixed Resource Capacity mode:
1 Optional (otherwise skip to step 2): If the RMX is not in Fixed Capacity
Mode.
Resource re-configuration (if the system is already set to Fixed Resource
Capacity mode) should only be performed when no conferences are running on
the RMX.