Filter
Top Products
Polycom RMX 2000 Administrator’s Guide
H-21
Defining a SIP Network Service in the RMX
Your Polycom RMX 2000 system should be installed according to
standard installation procedures. See the Polycom RMX 2000 Getting
Started Guide, which describes how to set up and configure the MCU.
When configuring the Default IP Network Service on first entry, or when
modifying the properties of the existing Default IP Network Service, the
SIP environment parameters must be set as described in “Defining a SIP
Network Service in the RMX” on page 21.
To configure the RMX 2000 IP Network Service:
1 Using the Web browser, connect to the RMX.
2 In the RMX Management pane, expand the Rarely Used list and click
IP Network Services ().
3 In the IP Network Services pane, double-click the Default IP Service
(, , or ) entry.
The Default IP Service - Networking IP dialog box opens.