Filter
Top Products
Polycom RMX 2000 Administrator’s Guide
16-85
Transactions
Table 2 lists Transactions that are recorded by the Auditor.
IP addresses of Signaling Host and Control Unit are the same.
IP Network Service configuration modified.
IP Network Service deleted.
MCU reset.
MCU Reset to enable Diagnostics mode.
Music file error.
NTP synchronization failure.
Polycom default User exists.
Restoring Factory Defaults.
Secured SIP communication failed.
SSH is enabled.
System Configuration modified.
System is starting.
Terminal initiated MCU reset.
The Log file system is disabled.
The software contains patch(es).
User initiated MCU reset.
Table 16-21 Transactions
Transaction
TRANS_CFG:SET_CFG
TRANS_IP_SERVICE:DEL_IP_SERVICE
Table 16-20 Alerts and Faults (Continued)
Event