Filter
Top Products
Polycom RMX 2000 Administrator’s Guide
12-9
10 View or modify the following fields:
11 Click OK.
12 If you have modified the Management Network Properties, reset the
MCU.
Modifying the Default IP Network Service
The Default IP Service parameters need to be modified if you want to
change the:
• Network type that the RMX connects to
• IP address of the RMX Signaling Host
• IP addresses of the RMX Media boards
• Subnet mask of the RMX’s IP cards
• Gatekeeper parameters or add gatekeepers to the Alternate
Gatekeepers list
• SIP server parameters
Table 12-4 Management Network Properties – LAN Ports Parameters
Field Description
Port Speed The RMX has 3 LAN ports. The administrator can set the
speed and transmit/receive mode manually for LAN 2 Port
only.
Port The LAN port number: 1, 2 or 3.
Note: Do not change the automatic setting
of Port 1 and Port 3. Any change to Port 1
speed will not be applied.
Speed Select the speed and transmit/receive
mode for each port.
Default: Auto – Negotiation of speed and
transmit/receive mode starts at 1000 Mbits/
second Full Duplex, proceeding downward
to 10 Mbits/second Half Duplex.
Note: To maximize conferencing
performance, especially in high bit rate call
environments, a 1Gb connection is
recommended.