Filter
Top Products
Polycom RMX 2000 Administrator’s Guide
F-7
Securing an External Database
TLS 1.0 is used when securing communications between the RMX and an
external database. The certificate is installed on the database server and
the RMX is the client. When the certificate is installed on the database
server, all client requests and responses are transferred via secure port
443.
It is important to verify that the external database application is operating
in secure mode before enabling secure external database communications
on the RMX. The RMX checks the validity of external database’s certificate
before communicating. If there is a certificate error an Active Alarm is
raised with Error in external database certificate in the description field.
To enable secure RMX Communications with an External Database:
Set the RMX to communicate with the database server via port 443 by
setting the value of the System Flag EXTERNAL_DB_PORT in system.cfg
to 443.
For more information see the RMX 2000 Administrator’s Guide,
"Modifying System Flags” on page 16-10.