Filter
Top Products
Chapter 12-Network Services
12-6
Static
Routes
Table
The system uses Static Routes to search other networks for
endpoint addresses that are not found on the local LAN.
Up to five routers can be defined in addition to the Default
Router. The order in which the routers appear in the list
determines the order in which the system looks for the
endpoints on the various networks. If the address is in the
local subnet, no router is used.
To define a static route (starting with the first), click the
appropriate column and enter the required value.
Router IP
Address
Enter the IP address of the router.
Remote IP
Address
Enter the IP address of the entity to be
reached outside the local network. The
Remote Type determines whether this
entity is a specific component (Host) or a
network.
• If Host is selected in the Remote Type
field, enter the IP address of the
endpoint.
• If Network is selected in the Remote
Type field, enter of the segment of the
other network.
Remote
Subnet
Mask
Enter the subnet mask of the remote
network.
Remote
Type
Select the type of router connection:
• Network – defines a connection to a
router segment in another network.
• Host – defines a direct connection to an
endpoint found on another network.
Table 12-2 Management Network Properties – Routes Parameters
(Continued)
Field Description