Filter
Top Products
Chapter 2-Additional Conferencing Information
2-56
8 In the Cascade field, select:
— Slave, if the participant is defined in a conference running on a
Slave MCU and will connect to the Master MCU (in the center of
the topology).
—
Master
, if the participant is defined in a conference running on
the Master MCU
(in the center of the topology)
dialing from the
Master MCU to the Slave MCU
.
9 Click OK.
The cascade-enabled dial-out link is created and the system
automatically dials out to connect the participant to the linked
conference, as well as the destination conference.