Filter
Top Products
Chapter 5-Address Book
5-6
Dialing Direction Select the dialing direction:
• Dial-in – The participant dials in to the
conference.
• Dial-out – The MCU dials out to the participant.
Notes:
• This field applies to IP participants only.
• Dial-out is forced when defining an ISDN/PSTN
participant.
Type The network communication protocol used by the
endpoint to connect to the conference: H.323, SIP or
ISDN/PSTN.
The fields in the dialog box change according to the
selected network type.
IP Address
(H.323 and SIP
Only)
Enter the IP address of the participant’s endpoint.
• For H.323 participant define either the endpoint
IP address or alias.
• For SIP participant define either the endpoint IP
address or the SIP address.
Note: This field is hidden when the ISDN/PSTN
protocol is selected.
Phone Number
(ISDN/PSTN
Only)
Enter the phone number of the ISDN/PSTN
participant.
Note: This field is only displayed when the ISDN/
PSTN protocol is selected.
Table 5-2 New Participant – General Properties (Continued)
Field Description