Filter
Top Products
Chapter 2-Additional Conferencing Information
2-4
Additional Video Resolutions in MPM+ Mode
The following higher video quality resolutions are available when the
RMX is working in MPM+ Mode:
• CIF 352 x 288 pixels at 50 fps.
• WCIF 512 x 288 pixels at 50 fps.
• WSD 848 x 480 pixels at 50 fps.
• W4CIF 1024 x 576 pixels at 30 fps.
• HD 720p 1280 x 720 pixels at 60 fps.
• HD 1080p 1920 x 1080 pixels at 30 fps.
The video resolution transmitted to any endpoint is determined by the
endpoint’s capabilities, the conference line rate, the Conference Profile’s
Motion and Sharpness settings and the RMX’s Card Configuration Mode
(MPM or MPM+).
Additional Intermediate Video Resolutions
Two higher quality, intermediate video resolutions replace the
transmission of CIF (352 x 288 pixels) or SIF (352 x 240 pixels) resolutions
to endpoints that have capabilities between:
• CIF (352 x 288 pixels) and 4CIF (704 x 576 pixels) – the resolution
transmitted to these endpoints is 432 x 336 pixels.
• SIF (352 x 240 pixels) and 4SIF (704 x 480 pixels) – the resolution
transmitted to these endpoints is 480 x 352 pixels.
The frame rates (depending on the endpoint’s capability) for both
intermediate resolutions are:
•In MPM Mode – 25 or 30 fps.
•In MPM+ Mode – 50 or 60 fps.