Filter
Top Products
Polycom RMX 2000 Administrator’s Guide
17-7
3 Click the Active Alarms tab to view alarms related to the RMX, i.e.
temperatures and main power sensors.
The Active Alarms dialog box displays fields that relate to faults and
errors detected on the RMX by sensors. The Active Alarms dialog box
is divided into two sections: HW Alarm List and SW Alarm List.
Each section’s alarm list can be saved as a *.xls file by clicking the
Save HW Alarm List and Save SW Alarm List buttons respectively.
Each alarm list color codes the severity of the alarm; Critical (RED),
Major (ORANGE) and Normal (GREEN).
Status The sensor’s active status.
Ipmb Address(hex) Contains all the internal IPMI network addresses on
the IPMB bus, i.e. 0x20 (Switch), 0x86 (MFA), etc...
Table 17-4 MCU Properties - Event Log (Continued)
Column Description
If you connected to the Hardware Monitoring via the Shelf Management server,
the SW Alarm List section will not be displayed.