Filter
Top Products
Polycom RMX 2000 Administrator’s Guide
16-13
H.263_ANNEX_T Set to NO to send the Content stream without
Annex T and enable Aethra and Tandberg
endpoints, that do not support Annex T, to
process the Content.
Default: YES
HD_THRESHOLD_
BITRATE
Sets the minimum bit rate required by
endpoints to connect to an HD Conference.
Endpoints that cannot support this bit rate are
connected as audio only.
Range: 384kbps - 4Mbs (Default: 768)
ISDN_COUNTRY_
CODE
The name of the country in which the MCU is
located.
Default: COUNTRY_NIL
ISDN_IDLE_CODE_E1 The Idle code (silent), transmitted on the ISDN
E1 B channels, when there is no transmission
on the channels.
Default: 0x54
ISDN_IDLE_CODE_T1 The Idle code (silent), transmitted on the ISDN
T1 B channels, when there is no transmission
on the channels.
Default: 0x13
ISDN_NUM_OF DIGITS When using ISDN Overlap sending dialing
mode, this field holds the number of digits to
be received by the MCU.
Default: 9
Table 16-2 System Flags – MCMS_PARAMETERS (Continued)
Flag Description