Polycom RMX 2000 Administrator’s Guide
G-7
For more information about First-time Power-up and the Fast
Configuration Wizard see the RMX 2000 Getting Started Guide,
"Procedure 3: First-time Power-up and Connection to MCU” on page 2-9.
5 Enter the following parameters using the information supplied by
your network administrator:
— Control Unit IP Address
— Shelf Management IP Address
— Control Unit Subnet Mask
— Default Router IP Address
6 Click the Save & Close button.
The system prompts you to sign in with the new Control Unit IP
Address.
7 Disconnect the LAN cable between the workstation and the LAN 2
Port on the RMX’s back panel.
8 Connect LAN 2 Port on the RMX’s back panel to the local network
using a LAN cable.
9 Enter the new Control Unit IP Address in the browser’s address line,
using a workstation on the local network, and press Enter to start the
RMX Web Client application.
10 In the RMX Web Client Login screen, enter the default Username
(POLYCOM) and Password (POLYCOM) and click the Login button.