Filter
Top Products
Appendix B-Alarms and Faults
B-2
Card not responding Possible reasons for the card not responding:
• No connection with MPM card.
• No connection with the Switch.
Central signaling component failure Possible explanations:
• Central signaling component failure; unit type:
[NonComponent\CSMngnt\CSH323\CSSIP]
• Central signaling component failure; unit type:
(invalid: [NonComponent\CSMngnt\CSH323\CSSIP])
• Central signaling component failure - Invalid failure
type. Unit id: [id], Type:
[NonComponent\CSMngnt\CSH323\CSSIP], Status:
[Ok\Failed\Recovered]
• Central signaling component failure - Invalid failure
type
Central Signaling indicating Faulty status Central signaling failure detected in IP Network Service.
Central Signaling indicating Recovery
status
Central Signaling startup failure
Configuration of external database did not
complete.
Could not complete MPM Card startup
procedure
Possible explanations:
• Unit loading confirmation was not received.
• No Media IP for this card.
• Media IP Configuration confirmation was not
received.
• Unspecified problem.
Could not complete RTM ISDN Card
startup procedure
CPU IPMC software was not updated.
D channel cannot be established
Table B-1 Alarms (Continued)
Alarm Code Alarm Description