Filter
Top Products
Chapter 2-Additional Conferencing Information
2-30
— Encrypted and non-encrypted conferences.
— Conferences with Content.
Enabling Closed Captions
Closed Captions are enabled by a system flag. By default, Closed Captions
are disabled.
To change the flag value:
1 On the RMX 2000 menu, click Setup > System Configuration.
The System Flags dialog box opens.
2 In the MCMS_PARAMETERS
tab, click the New Flag ()
button.
The New Flag dialog box is displayed.
3 In the New Flag field enter ENABLE_CLOSED_CAPTION.
4 In the Value field enter YES to enable Closed Captions or NO to disable
their display.
5 Click OK to close the New Flag dialog box.
The new flag is added to the flags list.
6 Click OK to close the System Flags dialog box.
For flag changes to take effect, reset the MCU. For more information, see the
RMX Administrator’s Guide, "Resetting the RMX” on page 16-90.