Filter
Top Products
Polycom RMX 2000 Administrator’s Guide
16-15
NUMERIC_CONF_ID_
MIN_LEN
The minimum number of digits that the user
must enter when manually assigning an ID to
a conference.
Range: 2-16 (Default: 4)
Note: Selecting 2 limits the number of
simultaneous ongoing conferences to 99.
TERMINATE_CONF_
AFTER_CHAIR_
DROPPED
If YES, sets conferences to automatically
terminate if the Chairperson disconnects from
the conference.
Default: YES
MS_ENVIRONMENT If YES, sets the RMX SIP environment to
integrate with Microsoft OCS solution.
Default: NO
LEGACY_EP_
CONTENT_DEFAULT_
LAYOUT
Defines the video layout to be displayed on
the screen of the legacy endpoints when
switching to Content mode.
Default value: CP_LAYOUT_1P7 (1+7).
For a detailed list of possible flag values for
the various video layouts, see Table 16-3,
“LEGACY_EP_CONTENT_DEFAULT_LAYO
UT Flag Values,” on page 16-17.
IVR_ROLL_CALL_USE_
TONES_INSTEAD_OF_
VOICE
When set to YES, the system does not
playback the Roll Call names when
participants enter or exit the conference. If the
voice messages are replaced with tones the
system will play these tones instead.
The use of tones requires the uploading of the
appropriate tone files in *wav format and
replacing the Roll Call Joined and Roll Call
Left message files with the tone files in the
Conference IVR Service - Roll Call dialog box.
When the flag is set to NO, Roll Call names
are announced when participants enter or exit
the conference.
Default: NO.
Table 16-2 System Flags – MCMS_PARAMETERS (Continued)
Flag Description