Filter
Top Products
Chapter 2-Additional Conferencing Information
2-62
Figure 2-6 MIH Cascading – Master-Slave Relationship
Video Session Mode, Line Rate and Video Settings
The types of MCUs, their position in the cascade topology and the
endpoint capabilities (HD/CIF and H.263/H.264) determine the Video
Session Mode of the MIH Cascading conference.
• When creating a cascading link between two RMXs:
— The RMXs operate in CP (Continuous Presence) mode.
• When creating a cascading link between MGCs and RMXs:
— If there are no MGCs on level 2, the MGCs can operate in either
in CP or VSW (Video Switching) mode.
— If there are MGCs on level 2, the MGCs can only operate in VSW
mode.
• When creating a cascading link between two MGCs:
— The MGCs must be configured to operate in VSW mode.
For more details about the MGC to MGC connection, see the MGC
Manager User’s Guide, Volume II, Chapter 1, “Ad Hoc Auto Cascading and
Cascading Links”.
To enable the connection of the links between cascaded conferences, they
must run at the same line rate.
Conference A
Master of Conferences B and C
Slave Conference of A
Master of Conferences
F and G
Conference B
Conferences D & E
Slaves of Conference B
Conference C
Slave Conference of A
Master of Conferences D and E
Conferences F & G
Slaves of Conference C
Cascade Links
Participant
Connections