Filter
Top Products
Chapter 1-Conference Profiles
1-14
7 Define the following parameters:
Table 1-6 New Profile - Video Quality Parameters
Field/Option Description
People Video Definition
Video Quality Depending on the amount of movement contained in
the conference video, select either:
• Motion – for a higher frame rate without increased
resolution. When selected, Video Clarity is
disabled.
• Sharpness – for higher video resolution and
requires more system resources.
Note: When Sharpness is selected as the Video
Quality setting in the conference Profile, the RMX will
send 4CIF (H.263) at 15fps instead of CIF (H.264) at
30fps. For more information, see RMX 2000
Administrator’s Guide, "Video Resolutions in CP” on
page 2-3.
Video Clarity™ When enabled (default), Video Clarity applies video
enhancing algorithms to incoming video streams of
resolutions up to and including SD. Clearer images
with sharper edges and higher contrast are sent back
to all endpoints at the highest possible resolution
supported by each endpoint.
All layouts, including 1x1, are supported.
Video Clarity is enabled only when Video Quality is set
to Sharpness (default setting) and is disabled when
Video Quality is set to Motion.
Video Clarity can only be enabled for Continuous
Presence conferences in MPM+ Card Configuration
Mode.