Filter
Top Products
Chapter 1-Conference Profiles
1-10
4 Click the Advanced tab.
High Definition
Video Switching
If the Operator Conference option is selected, this
option is disabled, and the selection is cleared.
When selected, the conference is ultra-high quality
video resolution, in a special conferencing mode which
implies that all participants must connect at the same
line rate and use HD video and all participants with
endpoints not supporting HD will connect as
secondary (audio only).
For more information, see "High Definition Video
Switching” on page 2-8.
Select the High Definition resolution; select either
HD 720p or HD 1080p (in MPM+ mode only).
If HD 1080p is selected, endpoints that do not support
HD 1080p resolution are connected as Secondary
(Audio Only) participants.
Notes:
• High Definition Video Switching conferencing mode
is unavailable to ISDN participants.
Operator
Conference
Select this option to define the profile of an Operator
conference.
An Operator conference can only be a Continuous
Presence conference, therefore when selected, the
High Definition Video Switching option is disabled and
cleared.
When defining an Operator Conference, the Send
Content to Legacy Endpoints option in the Video
Settings tab is cleared and disabled.
For more information, see Chapter 7, “Operator
Assistance & Participant Move” on page 7-1.
Table 1-4 New Profile - General Parameters (Continued)
Field/Option Description