Polycom 2000 Home Theater Server User Manual


 
Polycom RMX 2000 Administrator’s Guide
15-17
5 Define the required settings for Encryption and LPR.
6 Set the Auto Terminate - At the End option to When Last Participant
Remains ensuring that the gateway call will end when only one
participant is connected. For more details, see Table 1-5, “New Profile
- Advanced Parameters,” on page 1-11.
7 Define the remaining Profile parameters as described in "Defining
Profiles” on page 1-8.
Defining the Gateway Profile
A Gateway Profile is a conferencing entity, based on the Conference
Profile assigned to it, that enables endpoints to dial-in and initiate Gateway
Sessions. The system is shipped with a default Gateway Profile, named
Default_GW_Session.
When an endpoint calls the Gateway Profile, a new Gateway Session is
automatically created based on the Profile parameters, and the endpoint
joins the gateway call which can also be a multipoint conference if more
than two participants are connected to the conference.
The Gateway Profile defines the parameters of the gateway call that are
taken from the Conference Profile assigned to it, such as line rate,
resolution, the IVR Service to be used and the dial-in numbers.
To define a new Gateway Profile:
1 In the RMX Management - Rarely Used pane, click Gateway Profiles
.
Up to 1000 Gateway Profiles, Entry Queues, IP Factories and Meeting Rooms
can be defined in the RMX (they are all part of one repository whose size is
1000 entries).