Filter
Top Products
Chapter 1-Conference Profiles
1-12
Auto Terminate When selected (default), the conference automatically
ends when the termination conditions are met:
Before First Joins — No participant has connected to
a conference during the n minutes after it started.
Default idle time is 10 minutes.
At the End - After Last Quits — All the participants
have disconnected from the conference and the
conference is idle (empty) for the predefined time
period. Default idle time is 1 minute.
At the End - When Last Participant Remains —
Only one participant is still connected to the
conference for the predefined time period (excluding
the recording link which is not considered a participant
when this option is selected). This option should be
selected when defining a Profile that will be used for
Gateway Calls and you want to ensure that the call is
automatically terminated when only one participant is
connected. Default idle time is 1 minute.
Note: The selection of this option is automatically
cleared and disabled when the Operator Conference
option is selected. The Operator conference cannot
automatically end unless it is terminated by the RMX
User.
Echo
Suppression
When enabled (default), an algorithm is used to search
for and detect echo outside the normal range of human
speech (such as echo) and automatically mute them
when detected.
Clear this option to disable the Echo Suppression
algorithm.
Notes:
• This option is activated only in MPM+ Card
Configuration Mode.
• The CMA uses the Profiles that are stored in the
RMX. When the Echo Suppression is enabled, it
will be enabled in the conference that is started
from the CMA with that Profile. However, the CMA
does not display an indication that this option is
enabled for the conference.
Table 1-5 New Profile - Advanced Parameters (Continued)
Field/Option Description