Filter
Top Products
Appendix G-Configuring Direct Connections to RMX
G-6
Connecting to the Management Network
To connect directly to the RMX:
1 Using a LAN cable, connect the workstation to the LAN 2 Port on the
RMX’s back panel.
2 Connect the power cable and power the RMX On.
3 Start the RMX Web Client application on the workstation, by entering
the factory setting Management IP address in the browser’s address
line and pressing Enter.
4 In the RMX Web Client Login screen, enter the default Username
(POLYCOM) and Password (POLYCOM) and click the Login button.
The Fast Configuration Wizard starts.
If no USB key is detected and either: this is the First Time Power-up
or the Default IP Service has been deleted and the RMX has been reset,
the following dialog box is displayed:
LAN 2 Port