Filter
Top Products
14 Test Operation, Adjustment, Maintenance and Troubleshooting
14.1 Preparation for Test Operation
201
FX3G Series Programmable Controllers
User's Manual - Hardware Edition
11
High-Speed
Counters
12
Output Wiring
13
Wiring for
Various Uses
14
Test Run,
Maintenance,
Troubleshooting
15
Input/Output
Powered
Extension Units
16
Input/Output
Extension
Blocks
17
Extension
Power Supply
Unit
18
Other Extension
Units and
Options
19
Display Module
20
Terminal Block
3. For continuous use of a peripheral device (such as GOT) (using the connector conversion
adapter)
Cut off the area shown in the left figure below of the connector conversion adapter using a nipper, etc., and
connect the peripheral device as shown in the right figure below.
14.1.3 Connection to built-in programming connector (USB)
Connect and disconnect the communication cable for the peripheral device (personal computer).
At connection, confirm the cable and connector shape.
Communication
cable
Connection example
Cut off the dotted
line area.
Programming
connector
(USB)
USB Mini-B
plug
USB
Mini-B
connector