Filter
Top Products
21 Memory Cassette
376
FX3G Series Programmable Controllers
User's Manual - Hardware Edition
21.3 Installation
21.3 Installation
Be sure that the power is OFF when installing the memory cassette.
21.3.1 Installation
(when the expansion board/connector conversion adapter is not used together)
The FX3G-40MT/ES is used as the main unit in this example.
1 Remove the top cover.
Remove the top cover (A in the right figure) as shown in the
right figure.
2 Attach the side cover.
Attach the side cover (B in the right figure) as shown in the
right figure.
Caution:
- Make sure to attach the side cover before the memory
cassette. However, attachment of the side cover is not
necessary when using only the loader function and not always
connecting the memory cassette.
- Attachment of the side cover is not necessary when installing
the memory cassette under the top cover (S) of a 40/60-point
type main unit.
3 Raise the memory cassette detachment lever.
Raise the memory cassette detachment lever ("C").
4 Attach the memory cassette.
Install the memory cassette to the main unit.
A
1
Top cover (S)
B
C
3
4