Filter
Top Products
21 Memory Cassette
381
FX3G Series Programmable Controllers
User's Manual - Hardware Edition
21
Memory
Cassette
22
Battery
A
Special Devices
(M8000-,D8000-)
B
Instruction List
C
Discontinued
models
D
Precautions for
battery
transportation
E
Handling of
batteries in EU
member states
21.5 Saved Data Content
21.5 Saved Data Content
The following data is saved on the memory cassette.
*1. This function is supported in FX
3G PLC Ver. 2.00 or later. Do not connect a memory cassette with
special parameters saved to any FX
3G PLC earlier than Ver. 2.00.
*2. This function is supported in GX Works2 Ver. 1.87R or later.
*3. The maximum number of points for the memory capacity, comments, and file registers, can be
specified when the FX
3G programming tool is selected. The maximum number of points cannot be
specified when a programming tool other than the FX
3G is selected.
Item Description Saving Method
Program
Memory
Parameters
• Memory capacity setting
- Memory capacity (default setting: 8k steps)
2k/4k/8k/16k/32k steps
- Comment capacity
- File register capacity
• Modem initializing settings, Battery mode settings, RUN terminal settings
• RS/RS2 instructions / computer link function communication settings
• Positioning settings
• Special parameters
*1*2
Programming tool
*3
Sequence programs User-created sequence programs
Comments and file registers can be
created in the memory by setting
them in the parameter memory
capacity.
Comments
Max. 3150 points
(0 to 63 blocks,
1 block = 50 points / 500 steps)
File registers
Max. 7000 points
(0 to 14 blocks,
1 block = 500 points / 500 steps)
Extended file registers ER0 to ER23999 (24000 points)
• Sequence program
•GX Works2
•GX Developer