Mitsubishi Electronics FX3G Universal Remote User Manual


 
332
19 Display Module (FX3G-5DM)
FX
3G
Series Programmable Controllers
User's Manual - Hardware Edition
19.12 Memory Cassette Transfers
19.12 Memory Cassette Transfers
Data transfers between the internal EEPROM memory and a connected memory cassette can be performed
from the "Cassette" menu when the PLC is in a STOP state.
This menu is disabled, however, if a keyword is registered in the internal EEPROM. In this case, remove the
memory cassette and use the programming tool to cancel the internal EEPROM's keyword.
Caution
When a memory cassette is connected with a display module, perform the data transfer procedure in the
display module.
The memory cassette cannot be used for the data transfer procedure.
19.12.1 Transfer from internal EEPROM to memory cassette (Cassette <- PLC)
1) At the menu screen, use the [+] / [-] buttons to move the cursor to the
"Cassette" item, then press [OK] to display the "memory cassette
transfer screen".
To cancel the operation and return to the "top screen (time display)",
press [ESC].
2) Use the [+] / [-] buttons to move the cursor to the "Cassette PLC"
item, then press [OK] to display the screen shown to the right.
To cancel the operation and return to the "memory cassette transfer
screen", press [ESC].
3) Press [OK] to begin the transfer.
Or, press [ESC] to cancel the operation.
Caution
Do not turn the PLC power off or perform writing from the programming tool while a program is being
transferred by a "memory cassette transfer" menu operation, as these actions could destroy the program,
causing incorrect operation of the PLC.
4) Press [OK] or [ESC] to return to the "memory cassette transfer screen".
Item Operation Description
Cassette PLC
Copies internal program memory (EEPROM) data to a connected memory cassette.
Cassette PLC
Copies data from a connected memory cassette to the internal program memory (EEPROM).
Button Operation Description
ESC
Cancels the operation and returns to the "memory cassette
transfer screen".
- Disabled
+ Disabled
OK Executes the transfer.
Mem r yo
PL
assCttee
assCttee
PLCassCttee
C
O
aC
K
nseECS
xEcut
PLCas e t tse C
e
l
...lPeasewait
PLCas e t tse C