Filter
Top Products
5 Version Information and Peripheral Equipment Connectability
5.2 Programming Tool Applicability
58
FX3G Series Programmable Controllers
User's Manual - Hardware Edition
5.2 Programming Tool Applicability
5.2.1 Applicable versions of programming tool
1. GX Works2
• GX Works2 English version (SW DNC-GXW2-E) is applicable to FX3G PLCs from the following versions.
• GX Works2 Japanese version (SW DNC-GXW2-J) is applicable to FX
3G PLCs from the following
versions.
2. GX Developer
• GX Developer English version (SW D5C-GPPW-E) is applicable to FX3G PLCs from the following
versions.
• GX Developer Japanese version (SW D5C-GPPW-J) is applicable to FX
3G PLCs from the following
versions.
3. FX-30P
FX-30P is applicable to FX3G PLCs from the following version.
FX3G PLC version
Model name
(Media model name is
shown below.)
Applicable GX Works2
version
Remarks
Before Ver. 1.40
GX Works2
SW DNC-GXW2-E
Ver. 1.08J or later
-Before Ver. 2.00 Ver. 1.62Q or later
Ver. 2.00 Ver. 1.87R or later
FX3G PLC version
Model name
(Media model name is
shown below.)
Applicable GX Works2
version
Remarks
Before Ver. 1.40
GX Works2
SW DNC-GXW2-J
Ver. 1.07H or later
-
Before Ver. 2.00 Ver. 1.56J or later
Ver. 2.00 Ver. 1.86Q or later
The setting of the FX3U-ENET-ADP is supported in
Ver. 1.90U or later.
FX3G PLC version
Model name
(Media model name is
shown below.)
Applicable
GX Developer version
Remarks
Before Ver. 1.10
GX Developer
SW D5C-GPPW-E
Ver. 8.72A or later
-
Ver. 1.10 Ver. 8.78G or later
FX3G PLC version
Model name
(Media model name is
shown below.)
Applicable
GX Developer version
Remarks
Before Ver. 1.10
GX Developer
SW D5C-GPPW-J
Ver. 8.72A or later
-
Ver. 1.10 Ver. 8.76E or later
FX3G PLC version Model name
Applicable
FX-30P version
Remarks
Ver. 1.00 FX-30P Ver. 1.00 or later
• FX-30P (From first version) supports FX3G PLCs
(Ver. 1.10 or later).
• The IVMC instruction is supported in FX-30P Ver.
1.50 or later.