Filter
Top Products
19 Display Module (FX3G-5DM)
325
FX
3G
Series Programmable Controllers
User's Manual - Hardware Edition
11
High-Speed
Counters
12
Output Wiring
13
Wiring for
Various Uses
14
Test Run,
Maintenance,
Troubleshooting
15
Input/Output
Powered
Extension Units
16
Input/Output
Extension
Blocks
17
Extension
Power Supply
Unit
18
Other Extension
Units and
Options
19
Display Module
20
Terminal Block
19.9 Contrast
19.9 Contrast
The liquid crystal display contrast setting is specified at the "Contrast" menu. Selections made at this menu
are saved at D8302. A contrast setting of "0" is specified at factory default.
1) At the menu screen, use the [+] / [-] buttons to move the cursor to
the "Contrast" item, then press [OK] to display the "contrast
adjustment screen".
To cancel the operation and return to the "top screen (time
display)", press [ESC].
2) Use the [+] / [-] buttons to adjust the contrast.
To cancel the operation and return to the "menu screen", press
[ESC].
3) Press the [OK] button to register the selected setting and return to the "menu screen".
Button Operation Description
ESC Cancels the operation and returns to the "menu screen".
-
Lowers the contrast
(decreases the numeric value. The value can be decreased to -5.)
+
Increases the contrast
(increases the numeric value. The value can be increased to +10.)
OK Registers the selected setting and returns to the "menu screen".
0
Ctnorast
(5-10)~
3
Ctnorast
(5-10)~