Filter
Top Products
19 Display Module (FX3G-5DM)
321
FX
3G
Series Programmable Controllers
User's Manual - Hardware Edition
11
High-Speed
Counters
12
Output Wiring
13
Wiring for
Various Uses
14
Test Run,
Maintenance,
Troubleshooting
15
Input/Output
Powered
Extension Units
16
Input/Output
Extension
Blocks
17
Extension
Power Supply
Unit
18
Other Extension
Units and
Options
19
Display Module
20
Terminal Block
19.6 Monitor/Test Mode
3. Output [Y] / auxiliary relay [M] / special auxiliary relay [M] / state [S]
Forced ON/OFF operations are possible for the output [Y] / auxiliary relay [M] / special auxiliary relay [M] /
state [S] contacts.
1) Perform a monitor mode operation to display the device whose ON/
OFF status is to be changed.
→ Refer to Subsection 19.6.2 for monitor function operation.
2) Hold the [OK] button for 1 second or longer to switch to the test
mode. The device then begins blinking (refer to figure at right).
To cancel the operation and return to the "test subject selection
screen", press [ESC].
3) Use the [+] / [-] buttons to move the blinking position to the device
where a forced ON/OFF is desired.
To cancel the operation and return to the "monitor screen", press
[ESC].
4) Press the [OK] button to highlight the contact's ON/OFF status.
Return to the "monitor screen", press [ESC].
5) Press [ESC] to return to the monitor screen.
Button Operation Description
ESC Cancels the operation and returns to the "monitor screen".
-
Moves in the lower device No. direction (for forced ON/OFF subject
selection).
Hold for 1 second or longer for high-speed scrolling.
+
Moves in the higher device No. direction (for forced ON/OFF subject
selection).
Hold for 1 second or longer for high-speed scrolling.
Button Operation Description
ESC Returns to the "monitor screen".
-
Moves in the lower device No. direction (for forced ON/OFF subject
selection).
Hold for 1 second or longer for high-speed scrolling.
+
Moves in the higher device No. direction (for forced ON/OFF subject
selection).
Hold for 1 second or longer for high-speed scrolling.
OK Highlights the contact ON/OFF status.
Y00
Y10
Y20
Y30
........0
0
0
0
........
.. ....
........
Y00
Y10
Y20
Y30
.......0
0
0
0
.. .....
........
........
Y00
Y10
Y20
Y30
........0
0
0
0
........
........
........
Y00
Y10
Y20
Y30
........0
0
0
0
...6....
........
........