Filter
Top Products
5 Version Information and Peripheral Equipment Connectability
5.1 Version Information
57
FX3G Series Programmable Controllers
User's Manual - Hardware Edition
1
Introduction
2
Features and
Part Names
3
Product
Introduction
4
Specifications
5
Version and
Peripheral
Devices
6
System
Configuration
7
Input/Output
Nos., Unit Nos.
8
Installation
9
Preparation and
Power Supply
Wiring
10
Input Wiring
5.1.2 Version check method
The PLC version can be checked by reading the last three digits of device D8001/D8101.
5.1.3 Version upgrade history
FX3G Series performed the following upgrade.
Version
Manufacturer’s
serial number
Contents of version upgrade
Ver. 1.00
86****
(June, 2008)
From first version.
Ver. 1.10
8X****
(October, 2008)
• Supports following 15 instructions:
FLT(FNC49), VRRD(FNC85), VRSC(FNC86), ECMP(FNC110), EMOV(FNC112),
EADD(FNC120), ESUB(FNC121), EMUL(FNC122), EDIV(FNC123), ESQR(FNC127),
INT(FNC129), IVCK(FNC270), IVDR(FNC271), IVRD(FNC272), IVWR(FNC273)
• Supports connection of following expansion boards:
FX3G-2AD-BD, FX3G-1DA-BD, FX3G-8AV-BD
• Supports connection of display module (FX3G-5DM).
• Supports of the inverter communication function.
• Supports of the pulse width measurement function.
Ver. 1.20
96****
(June, 2009)
• Supports connection of following special adapter:
FX3U-3A-ADP
• Supports the hardware error function of FX3U-4DA-ADP.
Ver. 1.30
9Z****
(December, 2009)
• Supports of the MODBUS communication function.
• Supports the following instruction.
ADPRW(FNC276)
Ver. 1.40
111****
(January, 2011)
• Supports the following instruction.
IVMC(FNC275)
Ver. 2.00
124****
(April, 2012)
• Supports the following functions of the FX3U-16CCL-M:
- Network parameter
- Accessing the other station from CC-Link
- Remote device station initialization procedure registration
- CC-Link diagnostics
• Supports connection of following special adapter:
FX
3U-ENET-ADP
• Special parameter error (M8489 and D8489) is added.
Ver.2.10
134****
(April, 2013)
• Supports the IP address change function of FX3U-ENET-ADP.
Ver.2.20
13X****
(October, 2013)
• Supports connection of following expansion boards:
FX
3G-4EX-BD, FX3G-2EYT-BD
D8001/D8101
PLC type and
version
2 6 1 0 0
Version information (Example: Ver. 1.00)
PLC type (Example: 26 = FX
3G PLC)