Mitsubishi Electronics FX3G Universal Remote User Manual


 
4 Specifications, External Dimensions and Terminal Layout (Main Units)
4.1 Generic Specifications
44
FX3G Series Programmable Controllers
User's Manual - Hardware Edition
4. Specifications, External Dimensions and Terminal
Layout (Main Units)
This Chapter explains the specifications, external dimensions and terminal layout of the main units.
For the specifications for the input/output powered extension units, refer to Chapter 15.
For the specifications for the input/output extension blocks, refer to Chapter 16.
4.1 Generic Specifications
*1. The criterion is shown in IEC61131-2.
*2. For more information on the dielectric withstand voltage test and the insulation resistance test of the
terminals of each product, refer to the following.
Refer to Subsection 4.1.1.
*3. Ground the PLC independently or jointly.
Refer to Section 9.3.
*4. The PLC cannot be used at a pressure higher than the atmospheric pressure to avoid damage.
Item Specifications
Ambient temperature
0 to 55 C (32 to 131 F) when operating and -25 to 75 C (-13 to 167 F) when stored
Ambient humidity 5 to 95%RH (no condensation) when operating
Vibration resistance
*1
Frequency(Hz)
Acceleration(m/s
2
)
Half amplitude(mm)
When installed on
DIN rail
10 to 57 - 0.035
Sweep Count for
X, Y, Z: 10 times
(80 min in each
direction)
57 to 150 4.9 -
When installed
directly
10 to 57 - 0.075
57 to 150 9.8 -
Shock resistance
*1
147m/s
2
Acceleration, Action time: 11ms, 3 times by half-sine pulse in each direction X, Y, and Z
Noise resistance By noise simulator at noise voltage of 1,000Vp-p, noise width of 1 s, rise time of 1ns and period of 30 to 100Hz
Dielectric withstand
voltage
1.5kV AC for one minute
Between each terminals and ground terminal
*2
500V AC for one minute
Insulation resistance
5M or more by 500V DC megger
Grounding
Class D grounding (grounding resistance: 100 or less)
<Common grounding with a heavy electrical system is not allowed>
*3
Working atmosphere Free from corrosive or flammable gas and excessive conductive dust
Working altitude
< 2000m
*4
PLC
Other
equipment
Shared grounding
Good condition
Common grounding
Not allowed
Independent grounding
Best condition
PLC
Other
equipment
PLC
Other
equipment