Filter
Top Products
M200EH/EM Documentation Teledyne API - Model 200EH/EM Operation Manual
2
6.0 Operation Instructions
Step by step instructions for operating the analyzer.
7.0 Calibration Procedures
General information and step by step instructions for calibrating your analyzer.
8.0 EPA Protocol Calibration
Because there is no single, standard method for EPA equivalency in application where high concentrations of
NO
x
are measured, no specific EPA calibration/validation method is included in this manual.
9.0 Instrument Maintenance
Description of preventative maintenance procedures that should be regularly performed on you instrument to
assure good operating condition. This includes information on using the iDAS to predict possible component
failures before they happen.
10.0 Theory of Operation
An in-depth look at the various principals by which your analyzer operates as well as a description of how the
various electronic, mechanical and pneumatic components of the instrument work and interact with each other.
A close reading of this section is invaluable for understanding the instrument’s operation.
11.0 Troubleshooting & Repair
This section includes pointers and instructions for diagnosing problems with the instrument, such as excessive
noise or drift, as well as instructions on performing repairs of the instrument’s major subsystems.
12.0 Electro-static Discharge Primer
This section describes how static electricity occurs; why it is a significant concern and; how to avoid it and avoid
allowing ESD to affect the reliable and accurate operation of your analyzer.
Appendices
For easier access and better updating, some information has been separated out of the manual and placed in a
series of appendices at the end of this manual. These include version-specific software menu trees, warning
messages, definitions of iDAS & serial I/O variables as well as spare part listings, repair questionnaire,
interconnect drawing, detailed pneumatic and electronic schematics.
NOTE
Throughout this manual, words printed in capital, bold letters, such as SETUP or ENTR
represent messages as they appear on the analyzer’s front panel display.
NOTE
The flowcharts in this manual contain typical representations of the analyzer’s display
during the various operations being described. These representations are not intended
to be exact and may differ slightly from the actual display of your instrument.
USER NOTES:
04521C (DCN5731)