Filter
Top Products
Operating Instructions Teledyne API - Model 200EH/EM Operation Manual
58
A
1:NXCNC1=100 PPM
1
A2:N0CNC1=100 PPM
1
A3:N2CNC1=25 PPM
1
A4:NXCNC2=100%
1
NOX STB
SAMP FLOW
0ZONE FLOW
PMT
NORM PMT
AZERO
HVPS
RCELL TEMP
BOX TEMP
PMT TEMP
MF TEMP
O2 CELL TEMP
2
MOLY TEMP
RCEL
SAMP
NOX SLOPE
NOX OFFSET
NO SLOPE
NO OFFSET
O2 SLOPE
2
O2 OFFSET
2
TIME
SAMPLE
A1:NXCNC1=100 PPM
1
NOX = XXX
< TST TST > CAL SETUP
1
Default settings for user
selectable reporting range
settings.
2
Only appears if O
2
sensor
o
p
tion is installed.
Refer to
Section
6.2.1 for
definitions
of these
test
functions.
Toggle
<TST TST>
keys to
scroll throu
g
h list of functions
Figure 6-6-2: Viewing M200EH/EM TEST Functions
NOTE
A value of “XXXX” displayed for any of the TEST functions indicates an out-of-range
reading or the analyzer’s inability to calculate it.
All pressure measurements are represented in terms of absolute pressure. Absolute,
atmospheric pressure is 29.92 in-Hg-A at sea level. It decreases about 1 in-Hg per 300
m gain in altitude. A variety of factors such as air conditioning and passing storms can
cause changes in the absolute atmospheric pressure.
04521C (DCN5731)