Filter
Top Products
Teledyne API - Model 200EH/EM Operation Manual A Primer on Electro-Static Discharge
283
4. Reserve the anti-ESD container or bag to use when packing electronic components or assemblies to be
returned to Teledyne Instruments.
12.4.2.5. Packing Components for Return to Teledyne Instruments Customer Service.
Always pack electronic components and assemblies to be sent to Teledyne Instruments Customer Service in anti-
ESD bins, tubes or bags.
WARNING
DO NOT use pink-poly bags.
NEVER allow any standard plastic packaging materials to touch the
electronic component/assembly directly
This includes
, but is not limited to, plastic bubble-pack, Styrofoam
peanuts, open cell foam, closed cell foam, and adhesive tape
DO NOT use standard adhesive tape as a sealer. Use ONLY anti-ESD
tape
1. Never carry the component or assembly without placing it in an anti-ESD bag or bin.
2. Before using the bag or container allow any surface charges on it to dissipate:
If you are at the instrument rack, hold the bag in one hand while your wrist strap is connected to a ground
point.
If you are at an anti-ESD workbench, lay the container down on the conductive work surface.
In either case wait several seconds.
3. Place the item in the container.
4. Seal the container. If using a bag, fold the end over and fastening it with anti-ESD tape.
Folding the open end over isolates the component(s) inside from the effects of static fields.
Leaving the bag open or simply stapling it shut without folding it closed prevents the bag from forming a
complete protective envelope around the device.
NOTE
If you do not already have an adequate supply of anti-ESD bags or containers available,
Teledyne Instruments’ Customer Service department will supply them. Follow the
instructions listed above for working at the instrument rack and workstation.
User Notes:
04521C (DCN5731)