Filter
Top Products
Optional Hardware and Software Teledyne API - Model 200EH/EM Operation Manual
38
5.3. CARRYING STRAP HANDLE (OPT 29)
The chassis of the M200EH/EM analyzer allows to attach a strap handle for carrying the instrument (Figure 5-1).
The handle is located on the right side and pulls out to accommodate a hand for transport. When pushed in, the
handle is nearly flush with the chassis, only protruding out about 9 mm (3/8”).
Figure 5-1: M200EH/EM with Carrying Strap Handle and Rack Mount Brackets
NOTE:
Installing the strap handle prevents the use of the rack mount slides, although the rack
mount brackets, Option 21, can still be used.
CAUTION
THE M200EH/EM WEIGHS ABOUT 17 KG (40 POUNDS) WITHOUT
OPTIONS INSTALLED.
TO AVOID PERSONAL INJURY:
WE RECOMMEND TWO PERSONS LIFT AND CARRY THE
ANALYZER.
MAKE SURE TO DISCONNECT ALL CABLES AND TUBING
FROM THE ANALYZER BEFORE CARRYING IT.
04521C (DCN5731)