Filter
Top Products
Optional Hardware and Software Teledyne API - Model 200EH/EM Operation Manual
50
Figure 5-11: M200EH/EM Ethernet Card
Rear Panel
(as seen from inside)
CPU
Card
Ethernet
Card
Female RJ-45
Connector
RE-232
Connector To
Motherboard
LNK LED
ACT LED
TxD LED
RxD LED
Interior View Exterior View
Figure 5-12: M200EH/EM Rear Panel with Ethernet Installed
This option can be installed in conjunction with the RS-2323 multidrop (option 62) allowing the instrument to
communicate on both types of networks simultaneously. For more information on using and setting up this
option see Section 6.11.6)
5.10. SAMPLE GAS CONDITIONERS (OPTS 86 & 88)
Several permeation devices using Nafion
®
permeation gas exchange tubes are available for applications with
high moisture and/or moderate levels of NH
3
in the sample gas. This type of sample conditioner is part of the
standard M200EH/EM equipment to remove H
2
O and NH
3
from the ozone generator supply gas stream but can
be purchased for the sample gas stream as well. All gas conditioners remove water vapor to a dew point of
about –20° C (~600 ppm H
2
O) and effectively remove concentrations of ammonia up to about 1 ppm. More
information about these dryers and their performance is available at http://www.permapure.com/.
The following options include the hardware required to
install the dryers.
04521C (DCN5731)