Filter
Top Products
Chapter 2 Tutrial
102 Chapter 2 Tutorial
■ Track editing (creating a loop phrase)
The LOOP 2 track is a loop that plays back endlessly, as is the LOOP 1 track. We will
adjust the start/end point of the sample to create a loop that is suitable for our song.
●
The loop phrase editing procedure is the same as described on page 55 of “Build-
ing Your Own Song.”
■ Modifying the sound
● Applying a band-pass filter
We will use a band-pass filter to modify the sound of the LOOP 2 sample. By default,
the FILTER group uses a low-pass filter (LPF), so we will first change this to a band-
pass filter (BPF), and then modify the [CUTOFF] and [RESONANCE].
Procedure
1.
Press the [TRACK SET] button, and then press the second button from the top to se-
lect [FILTER TYPE].
2.
The display will indicate “FILTER TYPE=LPF” (default).
▼ Rotate the dial to select “FILTER TYPE=BPF,” and press the [OK] button.
The filter type has now been set to BPF.