Filter
Top Products
Chapter 2 Tutorial
76 Chapter 2 Tutorial
Procedure
1.
Press the PAD FUNCTION [ON/MUTE] button.
2.
We will start with the settings of the [TOP] and [G] scenes, and un-mute the CL1/2
tracks of track bank [1].
▼ Press the TRACK BANK [1] button to select track bank [1]. Then press the pads of
CL1/2 tracks to make the bracket (
) appear for the CL1/2 tracks.
3.
Press the PAD FUNCTION [PLAY] button.
4.
Set the [SCENE/MARKER] switch to the SCENE position.
5.
Continue pressing the [A] button until the display indicates “SCENE STORED.”
6.
Release the [A] button. The settings have now been stored.
Using the same procedure as you did for Intro A and Ending B, store mute settings
for each scene button as described below.
● Break = scene button [B]
All tracks are muted.
TRACK LOOP C.LOOP FREE
BANK 1 2 1234 1234
[1] × × ×××× ××××
[2] × × ×××× ××××
●Section A = scene button [C]
Un-mute the LOOP1/2, CL1/2, and FREE 1–4 tracks of track bank [1], so that they
will be heard.
Mute all FREE 1–4 tracks of track bank [2].
TRACK LOOP C.LOOP FREE
BANK 1 2 1234 1234
[1]
××
[2] × × ×××× ××××
●Sections B and E = scene button [D]
Un-mute all tracks of track bank [1] so that they will be heard.
Mute all FREE 1–4 tracks of track bank [2].
TRACK LOOP C.LOOP FREE
BANK 1 2 1234 1234
[1]
[2] × × ×××× ××××