Filter
Top Products
Chapter 2 Tutorial 107
CHAPTER 2
2.
The display will indicate the effect type that is currently selected for EFFECT 2.
▼ This will be “1DELAY.”
Since “1DELAY” is a system effect (→ p.189), brackets (
) will be shown in the
meter area for all tracks.
3.
Each effect has several parameters which adjust some aspect of the effect. By modi-
fying the parameter settings, you can change the speed or depth etc. of the effect.
▼ Use the cursor buttons (
, ) to select the desired parameter, and use the dial
to modify its value.
For this example, we will set the parameters of the 1DELAY effect to the following
values. (Parameters marked by * differ from their default values.)
FBLVL ............ +32
FBHIDMP ...... 008
LOWGAIN ..... +00
HI GAIN ......... +00
LEVEL ........... 100
PAN ............... C
EF3 SEND..... 030*
NOTE:
• Effect parameter settings are made only for the effects themselves, and cannot be set
for individual tracks.
• The parameters will differ according to the effect type. For details on the parameters
of each effect, refer to the “Effect parameter list” (
→
p.335).
4.
After setting the parameters, press [OK] to return to the main display.
5.
Press the EFFECT/[EFFECT 2] button.
Displayed if previous
setting pages exist
Value of the
FBLVL parameter
Displayed if subsequent
setting pages exist