Filter
Top Products
Chapter 1 SU700 Components, Connections, and Startup 27
CHAPTER 1
Indicates that the selected track already contains a sample. If the track is empty, this
bar will not appear.
NOTE:
For TRACK EDIT | EVENT COPY, TRACK EDIT | EVENT INIT etc., it is also important to
know whether a selected track contains recorded sequence data. For these jobs, six bars
will appear at the center of the bracketed area to indicate that the track contains both a
sample and some sequence data.
Sample only: Sample plus sequence data:
Sample Recording Meter
When you are standing by to record a sample (or to execute a resampling job), the
meter operates as a two-bar horizontal level meter. The top part of the meter moni-
tors the level for the LEFT channel input, while the bottom part of the meter moni-
tors the level for the RIGHT channel input. In addition, the word CLIP will appear at
the upper right of the screen if the input level exceeds the clip level.
In general, you want to adjust the input level so that the meter peaks all the way to
the right without triggering the CLIP indication.
The following shows how the screen may appear when you are standing by to begin
sample recording.
1
2
3
4
5
1 Shows the recording parameters.
2 Monitors the left-channel input level.
3 Monitors the right-channel input level.
4 Shows the destination track.
5 CLIP indicator