Filter
Top Products
Chapter 2 Tutorial
36 Chapter 2 Tutorial
2.1 Setting Up
First you will need to connect your audio system so that you can listen to the demo
song and monitor the process of creating a song. You will also need to connect a CD
player so that you can playback the sampling sources from the included audio CD.
Connections
Before you make connections, be sure that the power of the SU700, your CD
player, and your audio system is turned off.
1.
Connect the analog outputs from your CD player to the ANALOG INPUT jacks
on the rear of the SU700.
●
The ANALOG INPUT (L, R) jacks are each monaural phone jacks. In order to
connect them to your CD player, you will need to obtain connecting cables that
are appropriate for each type of jack.
2.
Connect powered speakers or another monitoring device to the STEREO OUT
(L/MONO, R) jacks.
●
If you are using a monaural audio system, make connections to the L/MONO
jack.
R L/MONO
STEREO OUT
R L
ANALOG INPUT
AC INLET
OUT IN
MIDI
POWER
ON/ OFF
ATTENTION
:RISQUE DE CHOC ELECTRIQUE ME PAS OUVRIR.
RISK OF ERECTRIC SHOCK
DO NOT OPEN
WARNING
TO REDUCE THE RISK OF FIRE OR ERECTRIC SHOCK
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION
If you are using headphones, connect them to the PHONES jack located on the front
panel of the SU700.
●
The PHONES jack can be used simultaneously with the STEREO OUT jacks.
STEREO
OUT
ANALOG
INPUT
CD player
Audio system for monitoring
(amplified speakers, etc.)