Filter
Top Products
Chapter 10 Jobs 263
CHAPTER 10
Be aware that the deleted parts of the waveform cannot be recovered (unless you
restore a previous version of the sample from disk). Note that trimming a LOOP
sample may reduce the amount of length adjustment you can get with the SOUND/
[LENGTH] knob function (→ p.200), since the trim operation shortens the actual
waveform and therefore reduces the available length.
Procedure
Be sure that you have selected the song containing the sample(s) you want to work on.
1.
Press SAMPLE | PROCESS.
▼ The track brackets indicate the currently selected sample track. The screen briefly
displays PROCESS, and then displays the name of the last process job that you se-
lected.
2.
If the screen displays a job name other than TRIM, turn the dial so that the name
changes to TRIM.
3.
Select the track containing the sample you want to work on by pressing the appropri-
ate bank selector and/or pad. Then press [OK].
NOTE:
If you select an empty track, the screen displays NO SAMPLE. Select a different,
nonempty track.
▼ The screen displays the name of the sample existing on the selected track.
4.
Press [OK].
▼ The SU700 trims the waveform. The screen may display a “processing” pattern
while processing is in progress. When processing is completed, the job terminates
and the SU700 returns you to the main screen.