Filter
Top Products
Chapter 2 Tutorial
90 Chapter 2 Tutorial
8.
When saving is completed, the main screen will reappear.
2.3.15 Loading a song
Here’s how data (a volume) previously saved to a floppy disk can be loaded back into
the SU700. When you load a volume, the previously-created song data as well as the
SU700 setup data will be loaded.
●
It is also possible to load individual samples from data that was saved as a volume.
(→ p.283)
●
If a floppy disk containing a volume is inserted into the disk drive and the SU700’s
power is turned on, the volume will automatically be loaded from disk.
CAUTION
When a volume is loaded, all data currently in the SU700 will be lost. Be sure that any
important data has been saved to disk before you execute the load operation.
Procedure
1.
Insert a floppy disk containing a volume into the floppy disk drive.
2.
Press the [DISK] button, and then press the [LOAD] button located at the top.
3.
Rotate the dial to select “LOAD VOLUME,” and press [OK].