Filter
Top Products
Chapter 2 Tutorial 81
CHAPTER 2
MEASURE
BPM
NOTE
4.
Press to begin recording. Allow the lead-in measures to pass, while watching the
location indicator. When the position reaches 001:1 (the actual start of the song),
press and hold the FREE 1 track pad. Continue to hold the pad down for 22 mea-
sures, releasing it when the location reaches 023:1.
NOTE:
The number of lead-in measures is determined by the COUNTDOWN parameter in the
SYSTEM | SETUP job (
→
p.299). It is assumed that the SU700 is currently set to give you
two lead-in measures (since this is the factory default).
5.
Press to stop the sequencer. Press to restore the top scene.
Recording Ribbon Actions on FREE 2, FREE 3, and FREE 4 of track bank 2
First we set the ribbon so that it controls the “scratch” function.
1.
Press the [SYSTEM] job-group selector, and then the top job selector. This opens the
SYSTEM | SETUP job.
2.
Turn the dial until the screen displays RIBBON FUNCTION, and press [OK].